+91 70057 36620ilustraca.edu@gmail.com

ILU-800-BC01 Beam-Column Design (IS 800:2026)

Designs members carrying axial force with bending about both axes, using the IS 800:2026 member interaction factors.

Use it for Frame columns, portal frame members, eccentrically loaded columns, rafters, members straight out of ETABS / STAAD results
Section types I-sections, channels, SHS, RHS, CHS
Checks (IS 800:2026) Classification under combined N + M, Table 2 · tension, Section 13 · flexural buckling, 14.1.2 · bending about both axes including LTB, 15.2 · shear in both directions, 15.4 · high shear, 16.2 · section interaction, 16.3.1 and Table 17 · tension with bending, 16.3.2.1 · member buckling interaction, 16.3.2.2 with Kzz, Kyy, Kzy, Kyz (Table 18) and Cm (Table 19) · slenderness, Table 3
You enter Section, grade, unbraced lengths and end conditions, LLT, moment diagram for fm and Cm (end-moment ratio or sway), factored P (+C / −T), Mz, My, Vz, Vy, net-to-gross area ratio
You get Section class under the actual forces; Pd, Td, Mdz (with LTB), Mdy, Vd both ways; all interaction factors; ten utilisation checks with the governing one; SAFE / NOT ADEQUATE
Not covered Angles; torsional-flexural buckling of open asymmetric sections, Annex E

Know before buying: For λy < 0.4 in LTB-susceptible plastic sections, Table 18 prints Kyz “≤ 0.6λy“. The workbook uses min(0.6 + λy, …), the Eurocode form the table is based on, and states this in the report.

Common to every workbook

  • Design code: IS 800:2026 (Fourth Revision), limit state method. γm0 = 1.10, γm1 = 1.25 (Table 5).
  • Software: Microsoft Excel 2016 or later on Windows or Mac, including Microsoft 365. No macros, add-ins or internet connection needed.
  • Not supported: Google Sheets, LibreOffice, Excel Online editing.
  • Section database: 3,525 sections: IS 808:2021, SAIL, Jindal (JSPL), Tata Structura, APL Apollo, ArcelorMittal, British Steel, IS 4923 / IS 1161.
  • Steel grades: IS 2062 E250 to E450, EN S275 / S355 / S460, IS 4923 / IS 1161 YSt 210 to YSt 355.
  • Tabs: Guide, Input (live results), Summary (one-page report), Detailed (clause-by-clause calculation), Project (report title block).
  • Reports: A4 portrait, with your company name, project, client, job no., calc no., revision, made / checked / approved by and issue status (Preliminary to GFC). Your logo can be added to the report header.
  • Protection: all formulas locked; only shaded input cells can be edited.
  • Support: ilustraca.tech@gmail.com

Delivery: instant download after payment, and the download link is emailed to you.

These workbooks are design aids. Results must be reviewed by a qualified structural engineer, who remains responsible for the design. Confirm section availability with the supplier before specifying.

Share this article
Picture of Er. Sandip Deb

Er. Sandip Deb

Founder of Ilustraca Academy and a practising structural engineer in Kolkata. B.Tech (Civil), AMIE, CEng(I), Empanelled Structural Engineer with NKDA & KMC. He teaches RCC and steel design the way design offices work, with every software result checked by hand against the IS codes.

Learn it properly, step by step

Self-paced courses on ETABS, STAAD.Pro, RCDC and IS codes, plus hundreds of free lectures.

error: Content is protected !!
Scroll to Top