+91 70057 36620ilustraca.edu@gmail.com

ILU-800-C01 Compression Member Design (IS 800:2026)

Designs axially loaded columns and struts for flexural buckling about both axes, including single angle struts.

Use it for Columns, posts, struts, truss compression members, bracing in compression
Section types I-sections, channels, angles, SHS, RHS, CHS
Checks (IS 800:2026) Buckling classes a0 to d, Tables 7, 8 and 10 · effective length from end conditions, Table 11 (or your own K) · effective area of slender sections, 14.3.2 · single angle struts loaded concentrically or through one leg, 14.5.1 with Table 12 · slenderness limits, Table 3
You enter Section, grade, unbraced lengths about both axes, end conditions, slenderness category, angle connection type (angles only), factored axial compression
You get Buckling class, KL/r, λ, χ and fcd about both axes; Pdz, Pdy and design strength Pd; slenderness check; SAFE / NOT ADEQUATE
Not covered Torsional and torsional-flexural buckling, 14.1.2.2 (matters for channels, angles and tees); double angles and built-up members; compression with bending (use BC01)

Common to every workbook

  • Design code: IS 800:2026 (Fourth Revision), limit state method. γm0 = 1.10, γm1 = 1.25 (Table 5).
  • Software: Microsoft Excel 2016 or later on Windows or Mac, including Microsoft 365. No macros, add-ins or internet connection needed.
  • Not supported: Google Sheets, LibreOffice, Excel Online editing.
  • Section database: 3,525 sections: IS 808:2021, SAIL, Jindal (JSPL), Tata Structura, APL Apollo, ArcelorMittal, British Steel, IS 4923 / IS 1161.
  • Steel grades: IS 2062 E250 to E450, EN S275 / S355 / S460, IS 4923 / IS 1161 YSt 210 to YSt 355.
  • Tabs: Guide, Input (live results), Summary (one-page report), Detailed (clause-by-clause calculation), Project (report title block).
  • Reports: A4 portrait, with your company name, project, client, job no., calc no., revision, made / checked / approved by and issue status (Preliminary to GFC). Your logo can be added to the report header.
  • Protection: all formulas locked; only shaded input cells can be edited.
  • Support: ilustraca.tech@gmail.com

Delivery: instant download after payment, and the download link is emailed to you.

These workbooks are design aids. Results must be reviewed by a qualified structural engineer, who remains responsible for the design. Confirm section availability with the supplier before specifying.

Share this article
Picture of Er. Sandip Deb

Er. Sandip Deb

Founder of Ilustraca Academy and a practising structural engineer in Kolkata. B.Tech (Civil), AMIE, CEng(I), Empanelled Structural Engineer with NKDA & KMC. He teaches RCC and steel design the way design offices work, with every software result checked by hand against the IS codes.

Learn it properly, step by step

Self-paced courses on ETABS, STAAD.Pro, RCDC and IS codes, plus hundreds of free lectures.

error: Content is protected !!
Scroll to Top