Design strengths of a cross-section with no member buckling: tension, compression (squash), bending about both axes, shear and the combined N + M section check.
| Use it for | Quick capacity of a section, fully restrained members, short stocky members, checking section strength at a joint, comparing sections |
|---|---|
| Section types | I-sections, channels, angles, SHS, RHS, CHS |
| Checks (IS 800:2026) | Classification, Table 2 (2026 limits, including web limits under axial force) · effective area of slender sections, 10.8.2(d) · tension, 13.2 / 13.3 · compression of the cross-section, 14.1.2 / 14.3.2 · bending about z-z and y-y, 15.2.1 with the 1.2 / 1.5 Ze cap · shear including web shear buckling, 15.4 · high-shear reduction, 16.2 · combined axial force and bending, 16.3.1 and Table 17 |
| You enter | Section (from the drop-down), steel grade, factored P (+C / −T), Mz, My, Vz, Vy, support condition for the Ze cap, net-to-gross area ratio for bolt holes, allowable utilisation ratio |
| You get | Section class; Td, Pd, Mdz, Mdy, Vdz, Vdy; reduced moment capacities under axial force; utilisation ratio of every check; governing check; SAFE / NOT ADEQUATE |
| Not covered | Flexural, torsional and lateral-torsional buckling; member interaction (16.3.2); block shear and shear lag; bending of angles; high-shear reduction for minor-axis bending |
Know before buying: The compression and bending capacities here assume the member cannot buckle. For columns, struts or beams without full lateral restraint, you also need ILU-800-C01, B01 or BC01.
Common to every workbook
- Design code: IS 800:2026 (Fourth Revision), limit state method. γm0 = 1.10, γm1 = 1.25 (Table 5).
- Software: Microsoft Excel 2016 or later on Windows or Mac, including Microsoft 365. No macros, add-ins or internet connection needed.
- Not supported: Google Sheets, LibreOffice, Excel Online editing.
- Section database: 3,525 sections: IS 808:2021, SAIL, Jindal (JSPL), Tata Structura, APL Apollo, ArcelorMittal, British Steel, IS 4923 / IS 1161.
- Steel grades: IS 2062 E250 to E450, EN S275 / S355 / S460, IS 4923 / IS 1161 YSt 210 to YSt 355.
- Tabs: Guide, Input (live results), Summary (one-page report), Detailed (clause-by-clause calculation), Project (report title block).
- Reports: A4 portrait, with your company name, project, client, job no., calc no., revision, made / checked / approved by and issue status (Preliminary to GFC). Your logo can be added to the report header.
- Protection: all formulas locked; only shaded input cells can be edited.
- Support: ilustraca.tech@gmail.com
Delivery: instant download after payment, and the download link is emailed to you.
These workbooks are design aids. Results must be reviewed by a qualified structural engineer, who remains responsible for the design. Confirm section availability with the supplier before specifying.
